Plastic Film Squeeze Dryer for PE/PP Washing Lines

Taizhou Amige Machinery Co.,Ltd

Plastic Film Squeeze Dryer for PE/PP Washing Lines

Plastic Film Squeeze Dryer for PE/PP Washing Lines

Product Overview:

The plastic film squeeze dryer mechanically dewaters washed PE/PP film, woven bags and compatible flexible flakes. It reduces free water and compacts low-bulk-density material before thermal drying, storage or pelletizing.

plastic film squeeze dryer for PE PP washing lines

Suitable Washed Material

  • Washed LDPE or LLDPE film after rinsing
  • PP woven bags and compatible flexible scrap
  • Film flakes with a known inlet moisture range
  • Lines requiring denser, more stable feed before extrusion

The machine should not be selected from film type alone. Contamination, flake size, washing chemistry, inlet moisture, desired outlet condition and pelletizer feeding method all affect screw and drive selection.

Squeeze-Dryer Selection Table

Selection itemInformation required before quotation
Feed materialResin, film or woven bag, thickness and flake size
Inlet conditionMoisture, temperature and remaining contamination
Outlet targetMoisture requirement and desired compaction
CapacityRequired kg/h and operating hours
Downstream processStorage, thermal dryer or pelletizing line
ElectricalCountry, voltage, frequency and control requirement

The current page does not provide a reliable model-specific capacity or motor table. Output moisture and throughput will not be guaranteed without a defined feed and final configuration.

Connect Washing and Pelletizing Stages

Review the PE/PP film crushing and washing line for upstream sorting, shredding, washing and rinsing. Compare the two-stage PE/PP film pelletizing line when the squeezed material will feed an extrusion and filtration process.

The line proposal should show drainage, squeezed-material discharge, buffer storage, feeding height and the interface with the downstream dryer or pelletizer.

Request a Film Dewatering Proposal

Use the AMIGE inquiry page to send washed-film photos, resin, flake size, inlet moisture, required outlet condition, hourly capacity, downstream process, voltage and layout.

Request a Quote

Name(Required)
Optional. Include country code so our engineer can contact you.
Required. We will send the quotation and technical recommendation to this address.
Required. Please include material, capacity (kg/h), feed size, target output size, country and voltage.
Optional. Example: PET bottles, HDPE pipe, plastic film or pallets.
Optional. Used to recommend voltage, service and shipping options.
Optional. Target throughput, for example 1,000 kg/h.
Optional. Maximum feed dimensions or typical piece size.
Optional. Required flake or particle size after processing.
Optional. Include voltage, frequency and phase.
This field is for validation purposes and should be left unchanged.

Related Product