The 918-KOB cable stripping machine is a dual-roller, multi-port model with a recorded 1–42 mm cable range. The current page lists more blade and feed-hole positions than the 918-KO, making it suitable for buyers comparing a broader set of sorted cable sizes.
Suitable Procurement Scenarios
- Mixed but sorted cable within the recorded 1–42 mm range
- Workshops changing between repeat cable sizes
- Jackets that may need different blade positions
- Buyers requiring a heavier 2.2 kW machine with more ports
Tangled harnesses, fine mixed wire, steel armour and irregular connectors may require preparation or a different recycling process.
918-KOB Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 2.2 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–42 mm |
| Recorded blade entry | 23 + 5 |
| Recorded feed-hole entry | 21, shown as 1 + 5 + 5 + 10 |
| Reference speed | 30 m/min |
| Machine dimensions | 70 × 61 × 84 cm |
| Reference weight | 110 kg |
The “23 + 5” blade notation is not sufficiently clear for quotation and must be checked against the supplied model. Processing output varies with cable construction, port selection and operator feeding.
Compare 918-KO and 918-KOD
Review the 918-KO multi-port cable stripping machine for a smaller recorded 1–35 mm range. Compare the 918-KOD large-cable stripping machine when the project includes thicker cable and a simpler two-blade entry.
Buyers should submit representative cable for every intended feed position before fixing the model and spare-parts list.
Request an 918-KOB Proposal
Send cable samples, conductor and jacket, diameter range, batch mix, daily volume, voltage and required stripping result through the AMIGE inquiry page.
