The 918-KOF cable stripping machine is a heavier multi-port model with a 3 kW motor and a recorded 1–50 mm cable range. Six double-blade positions are listed for buyers handling a broader set of prepared cable jackets.
Suitable Procurement Scenarios
- Mixed sorted cable within the recorded 1–50 mm range
- Workshops requiring more feed positions and a heavier frame
- Cable jackets needing double-blade cutting on selected ports
- Buyers comparing a 3 kW model with the 2.2 kW 918-KO New
The machine is still a mechanical stripper, not a complete shredding and separation line. Fine, tangled or highly mixed cable may be better assessed on a copper wire granulator.
918-KOF Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 3 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–50 mm |
| Recorded blades | 19, including 6 double-blade positions |
| Recorded feed-hole entry | 2 + 2 + 11 |
| Reference speed | 30 m/min |
| Machine dimensions | 70 × 61 × 84 cm |
| Reference weight | 110 kg |
The recorded blade and feed-hole arrangement must be checked against the supplied machine. Output varies with cable preparation, jacket, blade setting, roller pressure and operator feeding.
Stripping or Granulating the Cable
Compare the 918-KO New cable stripping machine for a lighter 2.2 kW model in the same nominal cable range. For fine, tangled or mixed wire that cannot be fed individually, review the QJ-400S01 copper wire granulator.
The correct process depends on whether the buyer needs intact conductors from individual cable or separated copper granules from mixed feed.
Request an 918-KOF Cable Test
Use the AMIGE inquiry page to send cable samples, conductor and jacket, diameter range, daily volume, preferred process, voltage and workshop conditions.
