The 918-J/JO cable stripping machine uses dual blades and dual rollers for prepared scrap cable within the recorded 1–35 mm range. It is intended for processors comparing stronger feed traction and two-sided jacket cutting.
Suitable Cable for Evaluation
- Sorted copper or aluminium cable within the recorded diameter range
- Thicker PVC or rubber jackets that may benefit from dual cutting
- Straight cable with plugs, terminals and armour removed
- Workshop use requiring a mobile 2.2 kW machine
Cable construction matters more than outside diameter alone. Multi-core geometry, steel reinforcement, hard jackets and conductor flexibility should be checked with real samples.
918-J/JO Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 2.2 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–35 mm |
| Recorded blades | 13 |
| Recorded feed-hole entry | 2 + 10 |
| Reference speed | 30 m/min |
| Machine dimensions | 60 × 58 × 84 cm |
| Reference weight | 80 kg |
The model suffix and blade arrangement require confirmation before quotation. Output varies with cable preparation, jacket adhesion, blade depth, roller pressure and operator feeding.
Compare 918-F and 918-KA
Review the 918-F dual-roller cable stripping machine for a single-blade 1–30 mm model. Compare the 918-KA multi-port cable stripping machine when additional double-blade feeding positions are required.
Buyers should submit the smallest, largest and most difficult cable samples for the same model assessment.
Request an 918-J/JO Proposal
Send cable samples, conductor material, jacket type, diameter distribution, daily volume, voltage and required stripping result through the AMIGE inquiry page.
