The plastic film squeeze dryer mechanically dewaters washed PE/PP film, woven bags and compatible flexible flakes. It reduces free water and compacts low-bulk-density material before thermal drying, storage or pelletizing.

Suitable Washed Material
- Washed LDPE or LLDPE film after rinsing
- PP woven bags and compatible flexible scrap
- Film flakes with a known inlet moisture range
- Lines requiring denser, more stable feed before extrusion
The machine should not be selected from film type alone. Contamination, flake size, washing chemistry, inlet moisture, desired outlet condition and pelletizer feeding method all affect screw and drive selection.
Squeeze-Dryer Selection Table
| Selection item | Information required before quotation |
|---|---|
| Feed material | Resin, film or woven bag, thickness and flake size |
| Inlet condition | Moisture, temperature and remaining contamination |
| Outlet target | Moisture requirement and desired compaction |
| Capacity | Required kg/h and operating hours |
| Downstream process | Storage, thermal dryer or pelletizing line |
| Electrical | Country, voltage, frequency and control requirement |
The current page does not provide a reliable model-specific capacity or motor table. Output moisture and throughput will not be guaranteed without a defined feed and final configuration.
Connect Washing and Pelletizing Stages
Review the PE/PP film crushing and washing line for upstream sorting, shredding, washing and rinsing. Compare the two-stage PE/PP film pelletizing line when the squeezed material will feed an extrusion and filtration process.
The line proposal should show drainage, squeezed-material discharge, buffer storage, feeding height and the interface with the downstream dryer or pelletizer.
Request a Film Dewatering Proposal
Use the AMIGE inquiry page to send washed-film photos, resin, flake size, inlet moisture, required outlet condition, hourly capacity, downstream process, voltage and layout.