The WPS1500 large-chamber single-shaft shredder is the widest model supported by the current WPS series record. Its 1530 × 1800 mm chamber is intended for bulky rigid-plastic feed and industrial scrap that exceeds the practical chamber size of smaller WPS models.
When to Consider WPS1500
- Feed pieces repeatedly exceed the WPS1200 chamber
- Large pallets, drums, housings or thick plastic scrap require a wider opening
- Conveyor or grab loading needs a larger receiving chamber
- The project requires screened discharge before secondary processing
Chamber size does not establish throughput by itself. Material strength, bulk density, screen opening, blade engagement, pusher cycle and downstream restrictions determine the usable production rate.
WPS1500 Reference Configuration
| Item | Reference value |
|---|---|
| Main-shaft length | 1500 mm |
| Rotor diameter | 500 mm |
| Main-shaft speed | 78 rpm |
| Ram travel | 1500 mm |
| Rotor blades | 99 pieces |
| Fixed blades | 4 pieces |
| Main motor | 132 kW |
| Hydraulic power | 11 kW |
| Screen opening | 30–120 mm |
| Cutting chamber | 1530 × 1800 mm |
| Overall dimensions | 3500 × 2870 × 2700 mm |
| Reference weight | 10000 kg |
The figures are reference data from the current page. Rotor design, blade material, screen, drive, controls and throughput must be confirmed for the real material and operating schedule.
Information Needed Before Quotation
- Material photos, composition and contamination
- Maximum dimensions and single-piece weight
- Required throughput and discharge range
- Loading method and hopper interface
- Downstream separation, granulation or washing process
- Voltage, floor space, operating hours and maintenance access
Compare the smaller WPS1200 model or review the single-shaft shredder category.
Request a WPS1500 Proposal
Send material photos, dimensions, piece weight, target output, capacity, loading and electrical requirements through the AMIGE inquiry page.
