The 918-KA cable stripping machine combines dual rollers with a multi-port blade arrangement. The current record states that five feeding holes use double blades, allowing buyers to assess several cable sizes and jacket-cutting positions on one machine.
When the Multi-Port Layout May Help
- Mixed but sorted cable sizes within the recorded 1–35 mm range
- Jackets that benefit from double-blade cutting at selected ports
- Workshops changing frequently between repeat cable types
- Buyers requiring a 2.2 kW mobile stripping machine
The cable still needs to be straight enough for controlled feeding. Tangled harnesses, fine wire bundles, steel armour and irregular connectors may require upstream preparation or granulation.
918-KA Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 2.2 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–35 mm |
| Recorded blades | 14, including 5 double-blade positions |
| Recorded feed-hole entry | 2 + 1 + 9 |
| Reference speed | 30 m/min |
| Machine dimensions | 60 × 58 × 84 cm |
| Reference weight | 80 kg |
The current blade and port notation requires confirmation. Processing speed and stripping quality depend on cable construction, feed selection and blade adjustment.
Compare Wider-Range Models
Review the 918-J/JO dual-blade cable stripping machine for a simpler 1–35 mm arrangement. Compare the 918-KO New cable stripping machine when the recorded cable range extends to 50 mm.
The proposal should identify which cable samples use each port and whether spare blades or rollers are required.
Request an 918-KA Port Configuration
Use the AMIGE inquiry page to send cable cross-sections, diameter range, jacket hardness, conductor type, daily volume, preferred voltage and stripping objective.
