The WT600 is a compact double-shaft shredder for primary size reduction of smaller drums, housings, containers, production rejects and selected bulky waste. Counter-rotating shafts pull material into the cutting zone and reduce it through shearing, tearing and compression.
Best-Fit Projects
- Small plastic drums, containers and moulded rejects
- Appliance housings and production waste within the chamber limit
- Wood, wire or light mixed scrap after composition review
- Pre-shredding before a crusher, granulator or separation process
The screen-free discharge provides primary pieces rather than a precise final flake size. A downstream crusher or granulator may be required when the project needs controlled small particles.
WT600 Reference Configuration
| Item | Reference value |
|---|---|
| Main-shaft length | 600 mm |
| Shaft speed | 16–25 rpm |
| Blades | 30 pieces |
| Blade diameter | 245 mm |
| Blade thickness | 18.5 mm |
| Main motors | 2 × 7.5 kW |
| Cutting chamber | 480 × 600 mm |
| Overall dimensions | 2000 × 1100 × 1700 mm |
| Reference weight | 1700 kg |
These figures are reference data from the current model record. Blade count, claw shape, thickness, material and usable throughput depend on the feed and required discharge.
Information Required for Selection
- Material composition and representative photos
- Maximum length, width, thickness and piece weight
- Metal, liquid or hazardous contamination
- Required throughput and acceptable discharge range
- Manual, conveyor or grab loading method
- Voltage, frequency, floor space and downstream process
Compare the larger WT800 double-shaft shredder or review the two-shaft shredder category.
Request a WT600 Proposal
Send material photos, dimensions, piece weight, target output, capacity and electrical standard through the AMIGE inquiry page. We will assess the cutter, drive and feeding arrangement.
