The 918-KOC cable stripping machine is a 3 kW model with six recorded feed holes and a nominal 1–65 mm cable range. It is intended for buyers comparing a heavier multi-size stripper without moving to the 100 or 160 mm 918-B/B1 models.
Feed and Diameter Boundaries
- Sorted copper or aluminium cable within the recorded range
- Straight cable prepared without large plugs or terminals
- Several repeat cable sizes suited to the six-hole layout
- Projects requiring a heavier 150 kg frame
Fine tangled wire, steel armour and complex multi-core cable require separate assessment. Maximum nominal diameter does not confirm suitability for every construction.
918-KOC Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 3 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–65 mm |
| Recorded blades | 11 |
| Recorded feed holes | 6 |
| Reference speed | 30 m/min |
| Machine dimensions | 82 × 79 × 121 cm |
| Reference weight | 150 kg |
All entries require confirmation against the supplied machine. Actual throughput and stripped-conductor quality vary with cable construction, jacket, blade depth, feed-hole selection and operator feeding.
Compare 918-KOD and 918-B/B1
Review the 918-KOD cable stripping machine for a simpler two-blade entry and a recorded 10–70 mm range. Compare the 918-B/B1 heavy-duty cable stripping machines when the project includes larger cable or requires a heavier model.
The final configuration should identify which sample cable uses each feed hole and which spare blades or rollers are required.
Request an 918-KOC Configuration
Use the AMIGE inquiry page to send cable photos, cross-sections, conductor, jacket, diameter distribution, daily volume, voltage and stripping objective.
