The WPS Series covers single-shaft plastic shredders for pipes, sheets, injection-moulded lumps, pallets, hollow products, film and mixed production waste. This page is the model-selection hub for the series. Individual machines should be selected by feed dimensions, material behaviour, screen requirement and downstream process.
How a Single-Shaft Shredder Works
A hydraulic ram pushes material toward a low-speed rotor fitted with replaceable knives. The rotor cuts material against fixed blades, and the selected screen controls which pieces leave the chamber. Rotor geometry and screen opening have a direct effect on feeding stability, output size, throughput and power demand.
WPS Series Reference Comparison
| Model | Shaft length | Rotor diameter | Motor power | Screen opening | Cutting chamber |
|---|---|---|---|---|---|
| WPS600 | 600 mm | 280 mm | 22 kW | 30–80 mm | 600 × 600 mm |
| WPS800 | 800 mm | 400 mm | 37 kW | 30–80 mm | 800 × 800 mm |
| WPS1000 | 1000 mm | 450 mm | 55/75 kW | 30–120 mm | 1000 × 1000 mm |
| WPS1200 | 1200 mm | 450 mm | 75/90 kW | 30–120 mm | 1200 × 1250 mm |
| WPS1600 | 1600 mm | 645 mm | 75 × 2 kW | 30–120 mm | 1600 × 1400 mm |
The values above summarize the currently recorded model range. They must be reconfirmed because blade count, rotor design, motor configuration and screen selection vary by material and project.
Match the Machine to the Feed
- Rigid lumps and thick sheets need adequate torque and chamber strength.
- Pipes and profiles require confirmation of maximum length and loading method.
- Pallets, drums and hollow parts require chamber and pusher sizing.
- Film or woven material requires an anti-wrapping review and may suit a double-roll design.
- Contaminated or metal-containing feed requires a separate process and safety assessment.
Review the model-specific WPS1000 page or compare the WLS1200 large-chamber shredder. More equipment is available in the industrial shredder category.
Request a WPS Model Recommendation
Send material photos, maximum dimensions, bulk density, required output size, capacity, operating hours and voltage through the AMIGE inquiry page. We will use this information to narrow the model, rotor, screen and feeding arrangement.
