The WPT1000/450 double-roll shredder is intended for flexible and wrapping-prone material such as plastic film, woven bags, raffia, container bags, packing straps and selected paper products. The two-roll cutting arrangement provides repeated material engagement before discharge through the screen.
Suitable Feed
- PE and PP film scrap
- Woven bags and container bags
- Raffia, packing straps and soft plastic products
- Selected paper or light flexible production waste
Actual suitability depends on roll form, moisture, contamination, metal content and feeding method. Densified bales and loose film behave differently and should not be quoted from the material name alone.
WPT1000/450 Reference Configuration
| Item | Reference value |
|---|---|
| Main-shaft length | 1000 mm |
| Rotor diameter | 450 mm |
| Main-shaft speed | 40 rpm |
| Rotor blades | 96 pieces |
| Fixed blades | 4 + 4 pieces |
| Main motor | 55 + 55 kW |
| Hydraulic power | 1.5 kW |
| Screen opening | 50–100 mm |
| Cutting chamber | 1010 × 1490 mm |
| Overall dimensions | 3800 × 2180 × 2650 mm |
| Reference weight | 6500 kg |
These figures are reference values from the current model record. Output depends on material form, bale density, moisture, screen opening, feeding rate and blade condition.
RFQ Information
- Film, bag or raffia type and material photos
- Loose, rolled, baled or compacted feed form
- Bale dimensions and maximum piece weight
- Moisture and contamination level
- Target output size and required throughput
- Conveyor, downstream washing and electrical requirements
For a larger cutting width, compare the WPT1200/450 double-roll shredder. Review additional configurations in the double-roll shredder category.
Request a WPT1000/450 Proposal
Send feed photos, bale or roll dimensions, moisture, target output, capacity and voltage through the AMIGE inquiry page. These details help determine whether the WPT1000/450 is suitable or a different feeding and cutting arrangement is required.
