The 918-F cable stripping machine combines a single cutting blade with dual-roller feeding. The recorded 1–30 mm range suits buyers processing sorted cable that needs more positive traction than a single-roller entry model.
Feed Conditions for Assessment
- Straight copper or aluminium cable within the recorded range
- Cable with PVC, rubber or compatible jackets
- Repeatable batches suitable for continuous manual feeding
- Applications where dual rollers can improve feed stability
The machine is not a shredder or copper-plastic separator. Fine wire, complex multi-core bundles, steel armour and irregular connectors require separate testing or removal.
918-F Recorded Reference
| Item | Current page reference |
|---|---|
| Motor power | 1.5 kW |
| Voltage | 220 / 380 V |
| Recorded cable range | 1–30 mm |
| Recorded blades | 9 |
| Recorded feed-hole entry | 2 + 9 |
| Reference speed | 30 m/min |
| Machine dimensions | 56 × 55 × 84 cm |
| Reference weight | 70 kg |
These figures require confirmation. Actual feed rate depends on cable diameter, curvature, jacket thickness, blade setting and the operator’s ability to maintain continuous feeding.
Model Comparison and Blade Setup
Compare the 918-AO single-roller cable stripping machine for a smaller recorded range. Review the 918-J/JO dual-blade cable stripping machine when two-blade cutting and 2.2 kW power are required.
The final configuration should define blade profile, roller pressure, feed holes, guarding and spare wearable parts for the sample cable.
Request an 918-F Configuration
Use the AMIGE inquiry page to send cable photos, conductor, jacket, diameter range, daily volume, stripping objective, voltage and preferred spare parts.
